GZ-3D Diesel Engine Type Concrete Spray Gunite Shotcrete Concrete Sprayer
GZ-3D concrete shotcrete machine description:
GZ-3D concrete sprayer is small-sized shotcrete machine for the dry spraying process.
GZ-3D concrete sprayer can be used as well for small jobs, such as joint filling, swimming pool, refractory application and extensive slope consolidation work, etc.
GZ-3 series concrete sprayer is available in following versions:
Basic: electric drive can be combined with tyre chassis
Extended (optional): air motor or electric drive combined skid or rail-wheel
GZ-3D concrete shotcrete machine features:
Non-adhesion going-through rotor with new material chamber, completely eliminate bonding and blocking during operation so as to reduce clearance and maintenance period.
Thin flow conveying method with vortex flow, so the spraying flow is even, continuous and steady, to improve the shotcrete quality.
Four-point clamping device make it easy to adjust the press between sealing plate and rotor disk so as to no air and dusk leak and prolong consumption parts life.
Rated output
|
2-3m 3 /h
|
Max. Horizontal conveying distance
|
200m
|
Suitable mix ratio(cement/sand)
|
≤ 1: 3~5
|
Max. aggregate size
|
Φ 10 mm
|
Conveying hose inner diameter
|
38/51mm
|
Operating air pressure
|
0.2-0.4MPa(29-58PSI)
|
Air consumption
|
5~6m 3 /min(180-215CFM)
|
Diesel engine
|
10hp,2200rpm
|
Diesel engine starting
|
Electric start
|
Clutch type in diesel engine
|
Automatic clutch
|
Material charging height
|
0.9m
|
Rotor speed
|
9-13r/min
|
Overall dimension(L× W× H)
|
1.8× 0.8× 1.2m
|
Net weight
|
480kg
|
GZ-3D concrete spraying machine advantages:
1. High quality, reliable performance.
2. Good seal performance, little dust.
3. Reasonable design, convenient to move.
4. Convenient operation and longevity of service.
5. Non-adhesion going-through rotor with new material chamber, completely eliminate bonding and blocking during operation so as to reduce clearance and maintenance period.
6. Thin flow conveying method with vortex flow, so the spraying flow is even, continuous and steady, to improve the shotcrete quality.
7. Four-point clamping device make it easy to adjust the press between sealing plate and rotor disk so as to no air and dusk leak and prolong consumption parts life.
8. Widely used in mining, tunnel, culvert, revetment etc.
Contact Supplier:
Many thanks for visiting our web, we can supply shotcrete machine for you. Before we send quotation, please let me know the following question:
1. What's the project you will use the machine do, for slope protect, or other?
2. Do you need dry-mix shotcrete machine or wet-mix shotcrete machine?
3. What's the output you need, 3m3/h, 5m3/h, 9m3/h, or other?
4. What's the maximum particle size of the material, less than 10mm, 15mm, or 20mm?
5. About the engine, do you need air motor, electric or diesel ? What voltage it is on your local? It is 3 phase 380V 50Hz in China.
We have many standard models for your option, and we also could customize as per your requirement. Please tell us your requirements and we will provide you with the corresponding product parameters and quotations. If you have any questions, please contact us.